Wavy Lamp Installation Guide

Standard Wavy Lamp

1. Unwrap the shade and remove the lightbulb from inside the shade
2. Take the base out of the smaller box and unwrap
3. Screw in the lightbulb tightly
4. Identify the smaller end of the shade (it’s the one that feels flatter on the edges!)
5. Place the base on a flat surface
6. Press the small end of the shade firmly onto the base until it clicks – don’t worry, the shades are flexible!

 

Tall Wavy Lamp

1. Unwrap the shade and remove the base (with attached lightbulb) from inside the shade
2. Place the base on a flat surface
3. Flip the shade around and press firmly onto the base until it clicks – don’t worry, the shades are flexible!